Metal roofs, shingle roofs and honest repairs for Bentonville, VA homeowners. Family owned since 2002, and estimates are always free.
Everything we do on a roof, done by crews who have been doing it the same careful way since 2002.
One leak usually has company. We fix the one you called about and check over the rest of the roof while we are already up there.
Missing shingles get matched as close as weathering allows. Loose metal gets new fasteners and washers, and the eaves, rakes and ridge get sealed back up tight.
Wind and debris damage is not always obvious from the ground. We check the edges, the ridge, the valleys and the fasteners before telling you anything is fine.
We match the guard to your trees and your gutter profile, and make sure water can still get in where it is supposed to.
This is the work our name is attached to. Two decades of tin roofs on houses, churches, barns and additions, installed by crews who cut the trim on site instead of forcing something that almost fits.
Buying, selling, or just want to know how many years you have left? We look, we tell you, and we do not turn it into a pitch for a roof you do not need.
A twenty year old panel roof usually needs fasteners and sealant, not replacement. We refasten with new washers and get you another long stretch out of it.
Temporary cover goes on fast, then we come back and make the permanent repair once we can see properly what we are working with.
Coatings for low slope and older metal roofs that are still sound but weathered. Washed down, refastened, primed at the rust, then coated.
Lifted panels, missing shingles, flashing that has given up where the chimney comes through. We find what is actually wrong, fix that, and leave the rest of your roof alone.
Repair or replace, we handle both, and we work from what the roof actually needs rather than from what an adjuster might approve.
When a roof is genuinely finished we replace it, and we say so plainly rather than dressing it up. Metal and shingle priced side by side so you can compare real numbers.
Where it makes sense we set low slope metal over a problem section so it finally drains instead of ponding after every rain.
Churches, shops, barns and small commercial buildings. We have roofed everything from a wood shed to a steeple.
New skylights set into metal or shingle roofs, with the flashing kit the roof actually calls for rather than a tube of sealant.
Slate and tile take patience and matching pieces. We replace broken and slipped units and rework the flashing they hide.
A shingle repair should not be visible from the street. We match as close as the weathering allows and blend the new work into the old.
Ice backs up at a cold eave and pushes water sideways under the roof. We clear it without gouging the panels or the shingles.
The edge of a roof is where most trouble starts. New fascia, new soffit, wrapped or painted so it stays sound.
The layer you never see is what keeps water out on the ugly days. We do not thin it out to save a few dollars on a bid.
Metal is what we are known for. Since 2002 the bulk of our work has been standing seam and metal panel roofs, and it is still what most Bentonville homeowners call us about. We measure on site, help you settle on a color, and set the panels straight.
We do shingle roofs too, and plenty of them. But if you have been thinking about a tin roof on your Bentonville home, that is the conversation we enjoy most — panel type, color, trim, and what it is really going to cost.
Why people around Bentonville call us back and send their neighbors our way.
The same family started this company putting metal roofs on neighbors houses in 2002. It has never been sold, franchised or handed off to a call center.
Around twenty standard metal colors, and the chart comes out with the estimate so you can hold it up against your siding and shutters before you commit.
Standing seam and metal panel roofs are the work we are known for. Color, trim, fastening pattern — we have done hundreds and we will walk you through all of it.
Beds get covered, tear off gets hauled as we go, and a magnet goes over the drive before we pull out. Your yard should look like we were never there.
You get a start date and we hold to it. If weather moves your job we call you, rather than leaving you watching the driveway.
Straight answers to what Bentonville homeowners ask us most often.
Sometimes. If the decking is sound and there is only one layer of shingles, a Bentonville metal roof can go over the top on purlins. If there is rot underneath or two layers already on, we tear off first — and we will tell you that before you sign, not halfway through.
Yes. Gutters, guards, soffit and fascia are all part of keeping the edge of a Bentonville roof dry, so we handle them along with the roof instead of sending you off to find somebody else to finish the job.
Often, yes. Plenty of the Bentonville roofs we get called to look at need flashing reworked or a section refastened, not a whole new roof. We will tell you honestly which one you are looking at, and if it is repairable we would rather repair it.
Most Bentonville houses are a two to four day job. A straightforward shingle roof can be done in a day or two. A cut up metal roof takes longer because every panel, valley and trim piece is measured and fit on site rather than pulled out of a box.
No. Estimates are always free in Bentonville. We come out, measure, look in the attic if we can get to it, and leave you a written price. Nobody will push you to sign anything that day, and the number does not expire in an hour.
Any dry stretch works. We roof in Bentonville year round, though we schedule shingle work for when it is warm enough for the strips to seal properly, and we watch the forecast so your house is never left open overnight.
Honest words from customers who trusted Roofing Brothers with their roof.
"Standing seam on our log home. The panels are dead straight and the ridge work is clean. You can tell they have done a few of these."
"Thank you so much to the entire crew at Roofing Brothers for our amazing new tin roof! You were amazing to work with and I couldn't recommend you to others enough! Great communication, pricing, color options, efficiency, and HONESTY! If anyone needs a new roof, I highly recommend this crew! Phenomenal job."
"Burgundy metal roof on our brick ranch and I get compliments on it constantly. They brought the color chart out and let us take our time deciding."
Our crews cover the surrounding area, not only the city limits.